落地鏜床工作臺安裝方法,落地鏜床工作臺制造標準的簡單介紹

落地鏜床工作臺安裝方法,落地鏜床工作臺制造標準的詳細信息

落地鏜床工作臺安裝方法,落地鏜床工作臺制造標準

落地鏜床工作臺是最常使用的機床工作臺之一，它包括落地鏜床工作臺，落地銑床工作臺等。高強度鑄鐵HT200-300 ，工作臺硬度為HB170-240 ，經過兩次人工處理，（人工退火600度-700度、自然時效2-3年）使用該產品的精度穩定，耐磨性能好

Floor-type Boring Machine Worktable is one of the the most commonly used machine tool worktable, which includes boring machine worktable and milling machine worktable.

The material of is high-strength cast iron HT200 and HT250. After two times’ artificial heat aging treatment( Artificial annealing temperature 600℃ to 700℃or 2-3 years natural aging) the internal stress was totally eliminated, so the surface plate have stable accuracy and good wear-resisting performance.

落地鏜床工作臺用途：主要用于機床加工工作平面的使用，工作臺上面有孔和T型槽，用來固定工件，和清理加工時產生的鐵屑。常用機床工作臺：落地鏜床工作臺、鏜銑床工作臺。

落地鏜床工作臺主要用于墜地鏜床、銑床、鏜銑床配套，機床加工工作平面使用，上面有孔以及T型槽，用來固定工件，以及清理加工時產生的鐵屑。常見的機床工作平臺如：落地鏜床工作臺、龍門銑床工作臺等。

落地鏜床工作臺具體適用于機械、發動機的動力實驗，設備調試，具有較好的平面穩定性和韌性，表面帶有T型槽，可以用來固定實驗設備；同時適用于各種產品的檢驗工作，鑄鐵平臺。同時應用于精度測量用的基準平面，機床工作臺,鑄鐵機床平臺還用于機床機械檢驗測量基準，機床工作臺用于檢查零件的尺寸精度或行為偏差，并作精密劃線，在機械制造中也是不可缺少的基本工具。

Usage:

Boring machine worktable is mainly used to match with floor-type boring machine, milling machine, boring and milling machine and machine tool working plane, on which working surface there are holes and T slots to fixed artifacts and to clean process of scrap iron.
Floor-type boring worktable is often used in many fields, such as machinery and engine testing, equipment debugging and it has stable flatness and toughness. It is with T slots, so it an be used to fixed laboratory equipment It can be used as the datum for measurement of the machinery parts’ geometric tolerance,such as flatness, parallelism, straightness and more. It is also can be used for precision inspection, marking out (layout), and tooling setup.Measuring Surface Plate is the indispensable basic equipment in most mechanical manufacturing industries.

落地鏜床工作臺安裝常識：分別為平臺支架安裝，地錨器安裝、墊鐵安裝、地腳螺栓安裝。地錨器安裝：鏜床工作臺可以設計地錨器安裝，首先用戶根據工作臺平臺的圖紙做好地基和預埋孔，然后把地錨器放到提前設置的預留孔里，將鑄鐵平臺調整水平。

墊鐵安裝：鑄鐵平臺調至水平、負荷均勻分布于各支點上。

Installation common sense:

There are four installation devices, that is supporting stand , anchor devices, pad iron and foundation bolts.

Installed with Anchor devices:

The foundation and embedded holes should be created according to the drawings before mounting the anchor devices.Mounting the anchor devices into the embedded holes and leveling the worktable.

Installed with pad iron:

Leveling the worktable with pad iron and make the load evenly distributed on the points.

以上是落地鏜床工作臺安裝方法,落地鏜床工作臺制造標準的詳細信息，如果您對落地鏜床工作臺安裝方法,落地鏜床工作臺制造標準的價格、廠家、型號、圖片有任何疑問，請聯系我們獲取落地鏜床工作臺安裝方法,落地鏜床工作臺制造標準的最新信息